Having trouble setting up multiple Led lights to on switch or power source?
Are you looking for some practical tutorial to help you set up Led lights specifically?
Don’t feel overwhelmed because after carefully researching,
I have formulated an easy step-to-step guide in this article which has all the critical information you will need regarding electrical circuits and wiring LED components.
Step To Follow
Step 1: What Type Of Circuit Should You Be Using?
It’s alright, even if you don’t have specialized skills in electronics, what you do need to know.
However, that is the power requirements of every lighting system different, and you will need to use this information to decide whether a series, parallel, or hybrid circuit is better for your particular application.
The easiest and most recommended type of circuit you can use to put multiple Led lights is the series mode. This is because the current in this type of circuit follows a singular path from start to finish.
Your strip, which has multiple Led lights, has a positive and negative end, so by extension, the positive end of one Led strip connects with the negative end of the next one, and the series can be extended so forth at both ends of the Led strip splitter.
This can then be plugged into the main power source or switch in the wall. A series circuit is a versatile option because you can create whatever patterns you like.
Step 2: Connect The Multiple Led Lights
The great thing about a series circuit is that you don’t require the expertise to connect multiple led lights to one power source individually.
What you need to do is locate the anode, which is the positive terminal, and the cathode that is the negative end of each of the led strips. This process is not as complicated as it seems, as most strips come labeled already by the manufacturers.
Decide what kind of shape or pattern you want the lights to have. This could vary depending on the area or the specific object you want to place the lights around.
So after you’ve decided the pattern, the next thing to do is to join the anode of the first strip of multiple led lights to the cathode of the next one until you’ve utilized all the Led lights.
The result of this step will be that you will have a length of several led strips with multiple lights on them.
Proceed by connecting the ends of the series of strips to a 2.1mm female plug so that you can put it in the male plug to power them on.
Step 3: Check The Power Requirements Of The Multiple Led Lights
This is a crucial aspect, so you must pay attention to the power ratings of the Led strips before you even try to plug them into a power source.
Remember that the total amount of power that is needed is the total voltage needed by each strip which you have connected in series.
Since this is a series circuit, it would be helpful to keep in mind that even though the same amount of current from the start till the end, that’s not the case for the voltage as it will be wary at each point.
Therefore it is of the utmost importance that the power output has sufficient power to provide to all the strips if you want to avoid damaging them or want a consistent quality of light output.
If the power outlet provides too much energy, it can harm your strips and even cause them to stop working. Led lights are an investment, so it’s better not to take that risk even before you get any use out of them.
Step 4: Placing The Multiple Led Light Setup
It is ideal to have the power source as near as possible to the area where you want the multiple Led lights to be placed so that you don’t have any trouble in making connections.
This will be an advantage for you because not only do you get to avoid installing new wiring and switches, which can get complicated, but you also get to save up on wiring costs.
The main reason for connecting multiple led lights to a single switch is to avoid creating an unappealing tangle of cables.
A power source nearby will help you avoid this problem and ensure that minimal wires are seen.
Step 5: Check The Connections
Nobody wants an electric accident as it can put both you and those around you in danger. However, the possibility of such an accident occurring is likely if the joints between the Led lights and the connectors are not properly installed.
So to avoid any such accidents, it is recommended that before you plug the lights into the main supply, you inspect each joint to investigate whether there are any errors in the connection, loose joints, or hanging wire threads that may have gone overlooked or you might have missed them before.
To be on the safer side, always take your time and don’t be hasty in your analysis of each node to guarantee that everything runs smoothly.
Key areas to pay attention to are the anodes and cathodes, endure that they are in their prime condition. Look for any visible defects which might be an indication that the lights have quality issues.
If you have resorted to soldering the led lights into the strip, now is the time to check that each solder stitch is firm and durable to confirm a sturdy joint.
Step 6: Plugging In
Plug the female part into its male correspondent and switch on the switch to verify that the multiple lights are powered on.
Conclusion
There’s something satisfactory about setting up the lighting in your house all on your own.
Not only is it economical but also fun! I hope this tutorial helped light up your house and provided the information you were looking for.
Leave a Reply