Rocker Switches house a button for an operation that can be pressed on both ends like a seesaw to connect or disconnect an electrical circuit.
They are used as ON/OFF switches on the main power supplies for electronic devices.
A normally open (NO) rocker switch has contacts that are open in their normal position. A normally closed (NC) rocker switch has contacts that are closed in their normal position.
An actuator is the part of the rocker switch that moves and applies force to contacts to turn the switch on or off. They are also used in UTVs (Utility Terrain Vehicles).
Rocker switches are generally considered ideal for new homes, modern renovations, and UTVs as they have a very affordable price and good quality.
Now that I have described a rocker switch’s working, uses, structure, and advantages, we will move on to find the best rocker switch for UTV for you.
Top 6 Rocker Switches For UTV
I will review some of the well-known and good quality switches to make the choice of your new rocker switch super easy!
1. MICTUNING MIC-LSB1 Rocker Switch
At first, we have the modern-looking MICTUNING MIC-LSB1 Laser Rocker Switch with an LED light, which makes it very easy to look at it in the dark, and it also makes it look very modern.
MICTUNING 5 Rocker Switch is SPST-designed (Single Pole Single Throw) switch. This comes with a 5 Pin switch, rated at 20amp/12v and 10amp/24v, that is available for upgrading most wiring harness.
This rocker switch comes with little jumper connectors and single connectors; all made with ends on them and a rubber protector on the female ends for insulation purposes.
More photos & price on amazon.com
Pros
- Easy wiring
- Universal fit
- LED light
- Recommended for UTVs
Cons
- Amps are overrated
- Blue LED does not switch off.
2. Nilight 90002B Rocker Switch
The rocker switch which we have next is very easy to install, and it fits easily in various places.
It had an LED light which can be turned off and on according to your desire because some users do not like LED light in the daytime as it makes it hard to read what’s written on it.
It is made up of high-quality plastic, and the patterns on this switch won’t fade, so that’s a plus point! Its terminal type is SPST.
The switch is very flexible for turning on or off as it can stand nearly 10,000 times presses under normal use.
More photos & price on amazon.com
Pros
- Good quality
- Fits perfectly
- Great value for the price
- Allows it to wire for accessory voltage or straight from the battery
Cons
- Bad quality LED light.
3. MICTUNING LS083601JL Rocker Switch
Next up, we have the most top-rated Mictuning Laser Stereo Rocker Switch Kit, five pins.
It is built with two premium LED lights that look super stunning so if you are a fan of LED lights, get your hands on this switch!
This switch is very lightweight and easy to fit.
More photos & price on amazon.com
Pros
- Affordable
- Fits perfectly
- LED lights
- Great for UTVs
Cons
- Poorly built
- LED lights are a bit dim
4. XJMOTO Universal Rocker Switch
This rocker switch is made up of plastic, and the great thing is that the surface of patterns is engraved.
Things that you will get with this specific model are; 1x 5 Pin Rear Light Rocker Switch, 1x 5 Pin LED Light Bar Rocker Switch, and a USB Power Charge Rocker Switch which is a great deal.
These rocker switches have a splendid blue color, which is loved by their buyers.
More photos & price on amazon.com
Pros
- Durable
- Good for heavy vehicles
- Long lifetime
Cons
- It doesn’t fit many vehicles.
- Over-priced
5. MICTUNING ACSSB Rocker Switch
This rocker switch is known for its sturdy durability and reliability. Users of this switch swear by it.
It wouldn’t be wrong if I said that they are addicted to it because of its good quality. It has a reasonable price so that everyone can afford them.
Another important thing about this rocker switch is that they are very easy to fit, and you do not have to struggle to install them.
More photos & price on amazon.com
Pros
- Inexpensive
- Good quality
- Fits nicely
- Well-structured body
Cons
- The light bar does not turn off.
- It will not fit factory jeep switch holes.
6. Nilight LED Light Bar Rocker Switch
Lastly, we have the Nilight LED Light Bar Rocker Switch, which has five pins on-off for easy connection.
It is very lightweight and has the dimensions of 2 x 1 x 1 inches, which makes it very handy and easy to fit.
All patterns are laser etched directly onto the switch surface to ensure long-lasting performance. It is also heat-resistant, so it will not be damaged in the scorching heat.
More photos & price on amazon.com
Pros
- Easy to install
- Great value for the price
- Locks in very tight
- High quality
Cons
- Pins on the back pull to come out.
- You can easily get scratches.
Buyer’s Guide
A buyer’s guide is used to simplify the process of purchasing a product by providing all the necessary information, which is exactly what I’m going to do now.
I will help you to identify a rocker switch that fulfills your needs.
Durability
If a product is not durable, why will you even waste your money on it? So my suggestion is to look for a durable and high-quality product.
Price Point
“All expensive things are of good quality,” said no one ever, because we all know that we can find a good quality product with a reasonable price tag.
Strong body
You don’t want a cheap-looking switch in your vehicle, right? So, get a product with nice quality and a firm body.
Frequently Asked Questions
Are rocker switches waterproof?
Yes. Most of them are.
Do rocker switches go bad?
Like everything, it can corrode over time.
Are all rocker switches the same size?
No, they come in different sizes.
Can switches turn themselves off?
Yes, it is possible in some cases.
Conclusion
If you made it till the end, I am very sure that you’d have found the perfect rocker switch for your UTV.
If not, make sure to go through it once again. Good luck!
Read Also
I have a DE Walt radial arm saw which I have had for a long number of years. The rocker switch for the on/off no longer works and the part is no longer availabe, it was a Bremas maufacture, made in Italy, 2hp single phase, part number AB 350, (10A), it is mounted on a copper plate 12mm wide by 41mm long, fitting in the handle 27mm wide by 73mm long. The rocker switch had 4 screw in contacts two for the power cable and two others one of which had been fused into the setting by burnt plastic around it. Any ideas what I can replace this with as it seems silly to through away a piece of DIY equipment for the want of a new rocker switch. The saw is part number DW 125 Power shop no longer sold but was working up to two weeks ago. Your help is appreciated if at all possible.